Hot Water

7 Steps On What To Do when Your Hot Water Is Not Working

Scott Markham - Monday, June 16, 2014

7 Steps On What To Do When Your Hot Water Is Not Working

 

Nothing screams domestic emergency more than running out of hot water. When you’re preparing for a new day at work and you hop into the shower only to realize that there is no hot water, you might just scream out your frustration. But rather than letting such a problem ruin your entire day, why not simply learn in advance how to resolve such an issue? There are many possible reasons why your hot water supply would run out.

 

Aside from running out, rust-coloured water could come out or the water could smell bad. You might also hear a rumbling or popping noise while the hot water is in use. If there’s water leaking around the base of the heater or if you hear a high-pitched whining noise, these are also signs of trouble. Essentially, the way to resolve the problem is by figuring out the root cause first, then creating a solution from there.

 

What to Do When Your Hot Water Supply Runs Out

 

If you have a standard tank-type water heater with an insulated storage tank and you are having problems with the hot water supply, here are seven possible scenarios and how you can deal with them:

  1. 1. Prepare safely for the job of resolving your water heater problem.

No matter what the reason is behind your hot water problem, there are a few preparatory steps that you need to follow first. Number one, make sure to turn off the fuel source – be it electric or gas. Turn off the circuit breaker or fuse which is powering the heater. For gas-operated heaters, shut off the valve which supplies gas to the water heater. Second, turn the gas pilot control valve to a pilot setting – then shut off the water supply.

 

  1. 2. Find out why no hot water is being produced.

If there is no hot water being produced, the problem could be caused by a faulty gas pilot, thermocouple or control valve. Check on the owner’s manual to see if you can do any basic troubleshooting steps. However, the basic solution would be to retighten or reposition the gas thermocouple, or to outright replace the control valve for the gas pilot.

 

  1. 3. Is there inadequate supply of hot water?

If you have a big family, did you purchase a hot water tank that will support your needs? It could be that your tank is undersized for the demand. Other possible reasons include fuel source problems, control problems, faulty plumbing installation or a broken dip tube which causes the hot and cold water to mix inside the tank. Based on the reason, you can perform some troubleshooting steps like replacing the cold water inlet and pipe nipple if necessary.

 

  1. 4. How to resolve rust-coloured hot water.

Corrosion is the number one cause of rust-coloured water. For this, you simply need to replace the sacrificial anode rod, which can be bought from plumbing supply stores.

 

 

5. Does the water coming out of the faucet or showerhead smell like rotten eggs?

If the water smells like rotten eggs, it could be caused by sediment settling down at the bottom of the tank. You can do a flushing of the water heater for this, while also using a peroxide solution to get rid of the unpleasant smell.

 

  1. 6. Do you hear a low rumbling or popping noise?

Sediment build-up can also be the cause of that low rumbling or popping noise in your water heater. To resolve, go through the steps of flushing the water heater.

 

  1. 7. Is there water leaking around the base of the heater?

Finally, if there is water leaking around the base of the heater, it could be caused by faulty relief valves or leaks from a nearby plumbing connection. Possible solutions include replacing valves for leaks, reducing the thermostat setting to prevent overheating, and water replacement if the bottom of the tank has marks of rust.

When To Replace Hot Water Heater

Scott Markham - Friday, May 30, 2014

6 Signs On When To Replace Hot Water Heater


Hot water tanks last for years. But when they are on their last legs, there are symptoms you can look for to determine whether they need to be replaced. You’ll need cold water, less hot water, leaks, sludge or corrosion, unusual sound and an old tank.

 

 

1. Feel the water.


 If you turn on hot water tap, and water is cold or if you expect to climb into a nice hot shower and are blind sighted by icy cold water, it’s probably time to replace your hot water tank.

 

 

 

 


2. See how long your supply of hot water lasts.

 

If you used to take much longer shower before the hot water ran out, there is probably a problem with the tank. You may need a new one.

3. Check the floor around your hot water tank for standing water.

 

  1. If there is puddle or pool of water around the base of the tank or stream of water running from the tank to the floor drain, there may be a major enough leak that you’ll need a replacement. If  your hot water tank is older and you don’t regularly drain and refill it , draining may actually create irreparable leak.

 


4. Inspect the fittings and connections.

  1. If there is water, sludge or corrosion there is likely a leak, it may be time to get a new tank.

 

 


5. Listen to your hot water heater

  1. If it frequently makes clanking noises or you hear pops or other unusual sounds, there is probably a mechanical problem. You’ll need a replacement tank

 

 


6. Check the age of the hot water tank

 

  1. Most hot water tanks are warranted for 5-10 years. While many lasts for years beyond the warranty’s expiration, if you notice inadequacy in your tanks performance, your tank is beyond its warranty date, it’s probably time to get a new one.

 

 

 

 

Hope the above information has helped you in determining when to replace hot water heater.




Sydney Services Area


  • Burwood
  • Killarney Heights
  • Rozelle
  • Chiswick
  • Lindfield West
  • Sylvania
  • Dee Why
  • Mona Vale
  • West Pymble
  • Woolooware
  • Dolls Point
  • Mortlake
  • Wiley Park
  • Bangor
  • Fairlight
  • Paddington
  • Parramatta
  • Normanhurst
  • Beaconsfield
  • Glebe
  • Alfords Point
  • Greenwich
  • Bellevue Hill
  • Potts Point
  • Hornsby
  • Ramsgate
  • Ryde
  • Kingsway West
  • Campsie
  • Bronte
  • Berala
  • Greenwich
  • Port Hacking
  • Punchbowl
  • Harbord
  • Berowra Heights
  • Asquith
  • Eastlakes
  • Newtown
  • Neutral Bay